Landoll Tillage

Landoll offers a complete line of tillage equipment. Whether you're looking for a machine to handle today's high residue BT corns or a machine to address your No-Till compaction concerns, Landoll has a machine to fit your needs.

7430 VT Plus

The premier vertical tillage tool on the market, the model 7430 VT Plus can be used in the spring or fall to size and mix soil with residue, and level the field. Designed for a shallow working depth. It is a fast, efficient, effective way to cover lots of acres. (Sizes: 23', 26', 29', 33')

2210 Disc Chisel Disc

Adjustable gang angles front and rear, combined with hydraulic gang heights, allow the operator to fine tune the unit for their desired performance. Available in 9,11,13 and 15 shank models, with the 13 and 15 featuring folding rear gangs for reduced transport widths. All units feature single point depth control, heavy-duty trunnion style bearings on the front and rear gangs, walking tandems, grease free bushings in the rockshaft area and are all backed by a 3-year Warranty.

875/876 Tilloll

True one-trip seedbed preparation tools; designed to be so from the start, not as an afterthought with parts added to a field cultivator. Designed with: 1) aggressive disc gangs set at 10 degree angles; 2) spray shields to knock down soil from the disc gangs and allow a smooth surface for chemical application behind the spray shield; 3) spring cushion c-shanks with 10" sweeps; 4) incorporation reel to mix the soil, placing the finer soil particles in the seedbed zone while incorporating chemicals, clods and residue are left on the surface to prevent wind and soil erosion; 5) a heavy duty three bar spike tooth harrow with individual spring loaded harrow arms to go through the heaviest residue without plugging.

6230 Disc

Producers who are pushing the envelope on yields with BT hybrids and other excessive residue producing crops, all have the same issue: "What to do with all of the heavy crop residue after harvest?" Research shows that sizing and incorporating residue into the top few inches of soil speeds up the breakdown. There is not a better tool on the market that addresses this issue than a Disc, and Landoll has launched the all-new 6230 tandem disc to lead the way.

2325/2327 Weatherproofer II

The Weatherproofer II is a primary tillage tool designed to disc and deep-till in one pass, eliminating the need to disc or chop stalks first. With a set of tandem disc gangs up front, followed by heavy duty 37" parabolic shanks, and another set of disc gangs in the rear. The Weatherproofer II uniformly mixes residue while slotting through the compaction zone for greatly enhanced soil water storage capacity and root growth. The rear disc gangs leave the ground level. The Weatherproofer II is engineered for deeper tillage without the need for prohibitive horsepower requirements.

2217 Weatherproofer I

The combination of the uniquely designed parabolic shanks and double offset tandem disc gangs makes the Weatherproofer possibly the most effective tool on the market for total soil, water, and residue management. The Weatherproofer is offered in a broad spectrum of sizes including two frame sizes, two different shank spacings, and a number of shanks ranging from 3 to 9 shanks.